Help With

How To

Settings & Misc

Help Wurd


Home » Web Pages » FTP » BulletProof FTP

Download BulletProof FTP for PWP @att.net

This document contains information on configuring BulletProof FTP for uploading to AT&T Worldnet Service PWP.

Note: You will need to find your AT&T Worldnet Service account information.

You can also use this application to backup your Web site.

  1. Open the Site Manager from the Main menu. Fill in the following information:
    • Site Name: Put whatever you wish here. We used AT&T Worldnet in the example below.
    • Initial Local Directory: The location of your Web site on your hard drive.
      For example: C:\MyWeb
    • Site Address: upload.att.net or upload.worldnet.att.net
    • Initial Remote Directory: Leave this blank
    • Login: your e-mail ID (the part to the left of the @ sign)
    • Password: your e-mail password
    site manager
  2. From the Options menu, choose the General tab, and make sure the following is set:
    • Time out settings: You may leave them at the default settings.
    • E-mail address: Your e-mail address
    The rest should be set according to your personal preference.
    general tab
  3. Select the Toggles tab. Make changes here according to your personal preferences.
    toggles tab
  4. Select the Firewall tab and make sure that there is a check mark next to Use passive mode. Leave everything else unchecked.
    firewall tab
  5. Select the Events tab. Make changes here according to your personal preferences.
    events tab
  6. Select the Viewing tab. Make changes here according to your personal preferences.
    viewing tab
  7. Select the Sound tab. Make changes here according to your personal preferences.
    sound tab
  8. Select the Uploading tab. Set the Default upload action to Overwrite, Ask or Skip, according to your personal preference. The AT&T Worldnet servers do not support resuming the upload of a file, so don't select Resume. Set the Filename conversion options according to your personal preference.
    uploading tab
  9. Select the Fonts tab. Make changes here according to your personal preferences.
    fonts tab
  10. Select the Other tab. Make changes here according to your personal preferences.
    other tab
  11. Leave the contents of Speed tab at the default setting and Click the OK button.
    speed tab
  12. Click the Connect button as shown below.
    main window

If you designated an Initial Local Directory in Step 1, the contents of that directory should show on the left. The contents of your Web site (if any) on the AT&T Worldnet personal Web page server will show on the right. To publish, transfer the files on the left to the AT&T Worldnet personal Web server shown in the right panel. To backup your Web site just reverse that procedure and transfer the files from the AT&T Worldnet personal Web server to your hard drive.

If you've followed the instructions exactly and are having problems uploading, try the troubleshooting steps in our PWP FAQ.

Back to top

Need Additional Help?

If you can't find the answers you need, please try:

  1. The help file for the application you are using.
  2. Our FAQs.
  3. The AT&T Worldnet Help Newsgroups.
Note: AT&T DSL Service support is available at http://dslhelp.att.net

Did you find this Web page useful?
scale from 1-5
Note: We are unable to answer questions submitted through this form. All submissions are automatically
tabulated and comments are sent to the Web design team, not to support personnel.
Please try AT&T Worldnet Help if you need further help.